InSite | Technical Update: Painting over intumescent strips

Painting Over Intumescent Strips

Download our Technical Manual V13

Download a PDF version of this article.

 

Introduction


This technical update provides additional guidance on painting over intumescent strips. It is important that all workmanship carried out during construction is completed in accordance with the relevant tolerances.

 

Details


Intumescent strips are fitted to doors to swell in the event of a fire, thus sealing the door to frame gap.


An intumescent strip is often installed as a combined unit which incorporates a fire resisting material and a cold smoke seal. The intumescent material expands on exposure to heat, sealing the door once a fire has taken hold. The brush or vinyl blade, which is effectively a draught excluder, helps prevent smoke getting past the door in the early stages of a fire.


If painted over, does this affect the integrity of the intumescent strips in the event of a fire?

 

The standards


BS8214:2008, The Code of Practice for Fire Door Assemblies, states: Painting of smoke seals or combined intumescent and smoke seals should be avoided.
If your fire doors are protected with a simple intumescent strip only (without a cold smoke seal) they can be over painted as long as it isn’t damaged by the painter’s preparation. Heavy sanding or the use of chemical strippers and heat guns during redecoration must be avoided.


BS8214 states that you can put a maximum of five coats of conventional oil bound paint or varnish on the strip without damaging its effectiveness.

 

Recommendations


You can only over paint an intumescent strip which is designed for fire protection. You must not over paint a smoke seal. Also, be careful to ensure that the strip isn’t damaged by the painter’s preparations.


References: British Standards – BS 8214 Code of Practice for fire door assemblies.

 

Looking for training that covers curtain walling and rainscreen cladding? Sign up for webinars delivered by our in-house experts:

 

> Register: curtain walling webinar
> Register: rainscreen cladding webinar

 


Every care was taken to ensure the information in this article was correct at the time of publication. Guidance provided does not replace the reader’s professional judgement and any construction project should comply with the relevant Building Regulations or applicable technical standards. For the most up to date Premier Guarantee technical guidance please refer to your Risk Management Surveyor and the latest version of the Premier Guarantee technical manual.